201 BA Stainless Steel Coil
200 series stainless steel is in chrome-nickel austenitic stainless steel based on the addition of manganese or nitrogen instead of nickel and developed, is 300 series stainless steel parity substitute.
Our Company provide factory competitive price.
We are willing to provide samples for testing.
According to ASTM666,The Chemical composition of 201 is that C(%) :0.15;Si(%):
1;Mn(%):5.5-7.5;Cr(%):16.0-18.0;N(%):0.25;P(%):0.06;S(%):0.03;Ni(%):3.5-5.5. 201 austenite elements, in addition to manganese, there is nitrogen, generally there is a moderate amount of nickel, manganese in steel plays a role in stabilizing austenite.
Physical properties of SS201
Tensile strength :520MPa
Yield strength :275MPa
Elongation :55 to 60%
Elastic modulus :203000MPa
Hardness requirements (Rockwell hardness)HRB≤100.
Density of 201 stainless steel:.280lbs/cubic inch(7.93g/cm3)
SS200 series’ advantages:(1)200 series stainless steel is a cheap replacement for the 300 series stainless steel (2)Under the premise of weak decay, ASTM202 stainless steel can almost completely replace 304 stainless steel (3)Because nitrogen strongly forms and stabilizes austenite and plays a good solution strengthening role, improving the strength of austenitic stainless steel, so 200 series stainless steel is suitable for the use of heavy loads and corrosion resistance requirements of equipment and components,like for decorative pipe, industrial pipe, some shallow stretching products.
Our company has a 25000 tons inventory of stainless steel coil, 18 production lines, 55 employees, 85% self-made, ISO system certification & TPI inspection quality.
Standard Specification of SS 201 Plate
|Width||600mm, 700mm, 800mm, 900mm, 1000mm, 1200mm, 1220mm, 1500mm, etc|
|Surface||No.1,No.4,HL with PVC,2B,BA,8K Mirror, checkered, etched, embossing etc|
|Finish||Hot rolled (HR), Cold rolled (CR), 2B, 2BA, BA NO(8), SATIN (Met with Plastic Coated)|
|Form||Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats,Circle, Ring (Flange) etc.|
|Color||Natural color, can be titanium gold color, titanium black color, rose red, champagne gold color, sapphire blue, bronzed color, coffee color, purple red, green, emerald green, copper red color and anti-finger print, etc.|
|Inspection||SGS,or other Third Party inspection|
|Package||PVC+ waterproof paper + strong sea-worthy wooden package|
The production capacity of our fatory is about 2000tons per year .We have many machines to meet all customers requirements.For example:brush,cutting,slitting ,embossed,etching,mirror,PVD color,Water plating,Laser.
Suitable for deep drawing products with small Angle type. And also suit for deep drawing and salt spray test products . Like sinks, kitchenware, bathroom products, kettles, thermos, hinges, POTS and so on.
Carbon content is slightly higher than J4 and copper content is lower than J4, its processing performance is not as good as J4, suitable for ordinary shallow deep drawing, deep drawing products large Angle type of products. Such as decorative.
SS201 J2 & J5
for decorative pipe:Just for simple adornment tube because hardness is high(above 96°), they will have a good-looking after polishing .Not suitable for square pipe or bend pipe.
For flat J2 &J5 can have Surface treatment such as frosting, polishing, plating for its high hardness and good surface.
Suit to decorate tube, for simple processing is ok. There is feedback that shear plate bending, broken after the internal seam (black titanium, color plate series, sanding plate, broken, folded out of the internal seam. The sink material has been bent for 90°.
We win lots of stable customers for our good quality and nice service,hope you will become our one of good customers.Contact us freely!
Send an enquiry
Send us your questions or inquiries via the form below and we will get back to you within 24 hours.